Passap Scallop Edge
Submitted by Diana Chew
Variation of a scallop edge.
Knitted in 2 ends 2/22 or approx. 3 ply yarn.
Instructions for Duo & E6000 (E6 setting in brackets. Console not required).
- Arrange needles for 1 x 1 rib for Tubular Cast-on.
- Orange strippers and racking handle up, ½ turn to the right.
- Both locks:
| N/N | Tension | 1.5 | Knit 1 Row | |
Attach comb. |
||||
| CX/CX | T |
2.25 | K 1 R | |
T |
2.50 | K 1 R | ||
T |
2.75 | K 2 R | ||
| N/N | T |
3 | K 1 R | RC 6 (finished cast-on). |
To set up for scallop edge
- On both beds put pushers into working position (i.w.p.) below needles in working position, ie. 1 x 1 setting.
- Now put every 5 th w.p. pusher into rest position (i.r.p.) ie. back into the rail on both beds.
Note:
To make a slightly larger scallop, put every 7 th pusher i.r.p. instead.
For 2 Colour Scallop, do cast-on in Col. 1 and the rest in Col. 2.
| (E6: BX/LX) * | BX/AX | T |
3.25 | K 5 R |
| N/N | T |
2.50 | K 1 R | |
| Repeat from * to * once |
||||
| N/N | T |
3/3 | K 2 R (RC 20) | |
- Put all needles into working position on both beds.
- Racking handle down (½ turn to the left).
- N/N 3.5/3.5 Knit 4 rows to finish.